Fostex PD606 - Manual (Page 55)

55
Location Recorder Model PD606
Chapter 3: Names and Functions
Rear panel
2 3 1 1
2. Battery mount 2
Mounts one or two IDX ENDURA batteries (see page 23 for details).
In this manual, we sometimes describe this mount as "BATT2".
3. Battery mount 1
Mounts one or two IDX ENDURA batteries (see page 23 for details).
In this manual, we sometimes describe this mount as "BATT1".
By opening the cover of battery mount 1, you can exchange the internal
hard disk drive (see page 37 for details about how to change the hard
disk drive).
* IDX, IDX (logo), ENDURE, V-Mount, V-Plate, Digi-View and i-Trax are the trademarks of IDX Com-
pany Ltd..
13. [OPEN] lever
Releases the lock of the protection cover of the tray (see page 33).
When you close the cover, press and lock the protection cover by hand.
1. Protectors
These protect the bottom panel when the unit is used vertically.
When a battery is fitted, extend the protectors.
You can adjust the height of the protectors by hand while sliding the
[ADJUST] levers on the left and right side panels (see page 25).
(Hz)
200 130
INPUT
SEL
200 130 200 130 200 130 200 130 200 130
48V T12
MIC
DM 48V T12 DM 48V T12 DM 48V T12 DM 48V T12 DM 48V T12 DM
LINE MIC LINE MIC LINE MIC LINE MIC LINE MIC LINE
When no battery is fitted, the protectors protect the projections on the
bottom panel.
<Note>: When the unit is set vertically with the projectors extended,
it should be set on a flat and stable surface, because it is easily
upset.