System clock selection [sync clock – Fostex PD606 User Manual
Page 181
181
Location Recorder Model PD606
Chapter 8: MENU mode/TC SETUP menu
Using the "Sync clock" menu item, you can select the system clock reference.
If you connect the PD606 to an external digital or video machine which does not have sync
clock output facility, use the PD606 internal clock as the system master clock.
You can also set the system clock reference using the quick setup mode.
INT
Digi in
Video
Word
The unit is referenced to external video clock received from the [WORD/VIDEO IN] con-
nector.
The unit is referenced to the internal clock master (default setting).
The unit is referenced to digital audio input signal received from the [DIGITAL I/O] connec-
tor.
The unit is referenced to external word clock received from the [WORD/VIDEO IN] con-
nector.
System clock selection [Sync clock]
3)
Use the [MENU] dial to select the desired option, and press the [ENTER/YES] key to confirm
your setting.
1)
When the unit is stopped, press the [SHIFT] key to light the [SHIFT] indicator, followed by the
[TIME/TC SET] key.
The display now shows the TC SETUP menu screen.
2)
While “Sync Clock” is highlighted, press the [ENTER/YES] key.
The current setting starts flashing and you can now select the desired option.
4)
Press the [EXIT] key repeatedly until you exit the MENU mode.
Flashing
You can select from among “INT”, “Video”, “Word” and “Digi in” (the default is “INT”).
Options