Fostex PD606 - Manual (Page 188)

188
Location Recorder Model PD606
Chapter 8: MENU mode/TC SETUP menu
Using the "JAM mode" menu item, you can select the jam mode for the generator "Free Run"
mode (You can set which information is jammed).
BOTH
TC
UBIT
Only time code data is jammed. For userbit, the userbit data of the internal generator is
used.
Both time code and userbit data are jammed.
Only the userbit data is jammed. For time code, the time code data of the internal generator
is used.
Jam mode setting [JAM mode]
2) Use the [MENU] dial to select the “JAM mode” menu item, and press the [ENTER/YES] key.
The current setting starts flashing and you can now select the desired option.
1) When the unit is stopped, press the [SHIFT] key to light the [SHIFT] indicator, followed by the
[TIME/TC SET] key.
The display now shows the TC SETUP menu screen.
3) Use the [MENU] dial to select the desired option, and press the [ENTER/YES] key to confirm
your setting.
4) Press the [EXIT] key repeatedly until you exit the MENU mode.
Flashing
You can select from among “BOTH”, “TC” and “UBIT” (the default is “BOTH”).
Options