Fostex PD606 - Manual (Page 99)

99
Location Recorder Model PD606
Chapter 5: Recording/Playback
Basic playback
Normal audio playback
The following procedure assumes that an audio file is recorded to a DVD-RAM disk or
hard disk partition.
1) Press the [SHIFT] key followed by the [FILE SEL / DRV, PAT.] key to enter drive select
mode.
2) Use the [MENU] dial to select the desired drive and press the [ENTER/YES] key.
3) Select the desired audio file you want to play back using either of the following methods.
<Selecting a file using the [[[[[ ] / [ ] / [ ] / [ ] / [ ] / [ ]]]]] keys>
<Selecting a file from the FILE SEL screen>
While the unit is stopped, press the [FILE SEL/DRV,PAT.] key to bring up the
FILE SEL screen, on which all audio files recorded to the selected drive are
listed.
Use the [MENU] dial to select the desired audio file and press the [ENTER/
YES] key.
The display shows the Home screen of the selected audio file.
LIGHT EXIT
MONO
ST
SOLO
C2
C3
C4
MS
FILE SEL TIME QUICK SET
PHONES
MONITOR
MAX MIN
4
3
2
1
5
6
L
R
ON
OFF
POWER
DVD HDD
ACCESS
PD606 LOCATION RECORDER
SHIFT CONTRAST MENU DRV,PAT. TC SET
ENTER / YES
BATT
1 / 3 / 5 + 2 / 4 / 6
ST BUS
READY TRK
C1
LINK MASTER
FILE SEL
DRV,PAT.
LOCATE CIRCLE TAKE CUE
OFF
SLATE JAM
MIC
TONE
PRE REC
OFF
ON symbol
0 9
WXYZ
MNO
6
DEF
3
CLEAR
FILE
FALSE START
CUE NEXT PREV
REC PAUSE
FILE
CUE NEXT PREV
See "Skip/locate functions" on page 100 for details.
By pressing the [ ] or [ ] keys
while the unit is stopped, you can
skip backward or forward to the
beginning of the previous or next
audio file.