Fostex PD606 - Manual (Page 187)

187
Location Recorder Model PD606
Chapter 8: MENU mode/TC SETUP menu
Editing the user bit
By using the [MENU] dial to highlight “User: 00 00 00 00” and pressing the [ENTER/YES]
key, the rightmost field of the current user bit (by default, “0”) starts flashing and you
can now make editing.
uuuuuuuu
MMDDYYuu
DDMMYYuu
BG_76: MM (month)/BG_54: DD (day)/BG_32: YY (year)/BG_10: uu (for USA)
The default is “00 00 00 00”.
BG_76: DD (day)/BG_54: MM (month)/BG_32: YY (year)/BG_10: uu (for EUR)
Use the [MENU] dial to select the user bit mode and press the [ENTER/YES] key to con-
firm your selection. You can select from among the following.
When selecting “MMDDYYuu” or “DDMMYYuu”, you can set the desired user bit to “uu”
of “BG_10: uu”. The other fields are automatically set to the date of the realtime clock.
You can enter the desired value to the flashing field using the numeric keys or the
[MENU] dial. You can move the flashing field using the [
] / [ ] keys.
3) Press the [ENTER/YES] key to confirm your setting.
4) Press the [EXIT] key repeatedly until you exit the MENU mode.
flashing
You can select from among “uuuuuuuu”, “MMDDYYuu” and “DDMMYYuu” (the default is “uuuuuuuu”).
Options