Stereo bus output connector – Fostex PD606 User Manual
Page 18
18
Location Recorder Model PD606
Chapter 1: Main features
•
Provides the stereo bus output connector (XLR 5-pin). From this connector
and output channels 1 through 6, you can output eight-channel signals.
5
.
0
(
A
)
X
A
M
V
4
2
-
2
1
N
I
-
C
D
V
4
2
-
2
1
U
O
-
C
D
T
D
B
Y
K
T
S
O
H
C
P
T
U
O
S
U
B
T
S
B
S
U
ADJUST
•
You can export a recorded audio file to the AVID system by creating the ALE
file.
•
The Mark/Cue function allows to store markers (cue points) during
recording. You can locate or skip to a cue point quickly.
•
The "False start" function allows to cancel recording easily.
•
"Pre Record" function allows glitch-free recording. When this function is
active, recent audio data is pooled in the buffer and recording starts from the
audio data in the buffer.
•
During recording, the audio file is automatically saved every minute in
background.
•
Equipped with the digital mixer which you can enjoy intuitive analog-like
operation.
Stereo bus output connector
•
In 24-bit/48kHz mode, you can record up to approximately 85 minutes onto
six tracks, or 64 minutes onto eight tracks.
* The times shown above are the recording times on a DVD-RAM disk (4.7GB)
or a partition (approx. 4.5GB) of the hard disk.
•
In 24-bit mode, you can make recording with sampling frequencies of 44.1/
48 kHz (up to 8 tracks), 88.2/96 kHz (up to 4 tracks) or 176.4/192 kHz (up to
2 tracks).
In 16-bit mode, you can make recording with sampling frequencies of 44.1/
48 kHz (up to 8 tracks).
Mixer section