Viewing ixml chunk data information, Editing ixml chunk data information – Fostex PD606 User Manual
Page 201
201
Location Recorder Model PD606
Chapter 8: MENU mode/DISK UTILITY menu
• Viewing iXML Chunk data information
You can view and edit iXML Chunk data via the "iXML descriptor" item.
1)
Select "iXML descriptor" and press the [ENTER/YES] key.
The display now shows the iXML descriptor information.
2)
Rotate the [MENU] dial to scroll the iXML Chunk data.
• Editing iXML Chunk data information
You can edit any desired iXML Chunk data.
1)
Use the [MENU] dial to select the line of the desired data and press the [ENTER/YES]
key.
The leftmost character flashes and you can now make editing.
2)
Use the alphanumeric keys or [MENU] dial to enter the desired information.
You can move the editing point (cursor point) using the
[
] / [
]
keys.
By pressing the [Enter] key of the USB keyboard, "down" is added at the end of the
current line and a new line begins.
3)
After you complete editing, press the [ESC] or [HOME] key of the USB keyboard or the
[STOP] key of the PD606.
The popup for confirmation as below appear on the display.
Pressing the [ENTER/YES] key updates iXML Chunk data to the edited data. Pressing
the [EXIT] key cancels editing.
<Note>:
After updating the iXML Chunk data, the display returns to the Home
screen by pressing the [STOP] of the unit or the [HOME] key of the USB key-
board.