Fostex PD606 - Manual (Page 191)

191
Location Recorder Model PD606
Chapter 8: MENU mode/TC SETUP menu
Using the "Edit LTC start" menu item, you can set the desired LTC start time of a playback audio
file. The LTC start time is recorded to the currently load file.
LTC start time editing [Edit LTC start]
<Note>: The PD606 records only the start time of LTC, and the internal generator generates
and outputs LTC with reference to the start time.
On a "BWF" file, the start time is recorded as "Time Reference" in "Broadcast Audio Exten-
sion Chunk". Therefore, if you want to use this LTC in Digidesign Pro Tools, export the audio
file to Pro Tools and make "User Time Code" effective.
3) Press the [ENTER/YES] key again.
Initially, the subframe value flashes and you can now edit the LTC start time.
4) After editing the start time, press the [ENTER/YES] key to confirm your setting.
Use the [MENU] dial (or the alphanumeric keys) to enter a desired value and use the
[
] / [ ] keys to move the cursor position.
2) Use the [MENU] dial to select the “Edit LTC start” menu item, and press the [ENTER/YES] key.
The LTC start time recorded on the current file is shown.
1) When the unit is stopped, press the [SHIFT] key to light the [SHIFT] indicator, followed by the
[TIME/TC SET] key.
The display now shows the TC SETUP menu screen.
5) Press the [EXIT] key repeatedly until you exit the MENU mode.
Flashing