Fostex PD606 User Manual
Page 163
163
Location Recorder Model PD606
Chapter 8: MENU mode/SYS SETUP menu
-
L
R
M
S
No output
The signal is output from the L channel of headphones.
The signal is output from the R channel of headphones.
Should be selected when the M (L+R) channel of an MS microphone is input (available
for channels 1, 3 and 5).
Should be selected when the S (L-R) channel of an MS microphone is input (available for
channels 2, 4 and 6).
6)
Use the [MENU] dial to select the desired option and press the [ENTER/YES] key to confirm
your setting.
7)
Repeat step 6) until you make all settings.
8)
Press the [EXIT] key repeatedly until you exit the MENU mode.
Selectable between “L”, “R”, “M” and “S”.
Options
5)
Use the [MENU] dial to select a desired channel/track and press the [ENTER/YES] key.
The current selection flashes and you can now select the desired option.
Flashing
<Note>:
If any channel is set to "M" (or "S"), the other channel of the 1-2, 3-4 or 5-6
pair is automatically set to "S" (or "M").
For example, if you set channel 3 to "M", channel 4 is automatically set to "S". Simi-
larly, if you set channel 2 to "S", channel 1 is automatically set to "M".