Fostex PD606 - Manual (Page 197)

197
Location Recorder Model PD606
Chapter 8: MENU mode/DISK UTILITY menu
The "Edit file name" menu item edits a file name of the currently loaded audio file.
3) While “Edit file name” is highlighted, press the [ENTER/YES] key.
The display now shows the "EDIT FILE NAME" screen. On this screen, you can edit
the current file name (the rightmost character of the name flashes).
4) Enter the desired name.
Use the [ ] / [ ] keys to move the cursor position and use the [MENU] dial (or the
alphanumeric keys) to enter a desired character.
By pressing the [CLEAR] key repeatedly when the cursor is pointing the leftmost
character, you can clear the whole name.
5) After entering the name, press the [ENTER/YES] key to confirm your setting.
The unit exits the MENU mode and the display shows the Home screen.
<Note>: If you enter a file name which already exists and press the [ENTER/YES]
key, "Illegal Name!" is shown and the display returns to show the previous screen
before editing.
<Note>: ".wav", the file extension, is automatically added, therefore, you do not
need to enter it.
Editing a file name [Edit file name]
1) While the unit is stopped, press the [SHIFT] key to light the [SHIFT] indicator, followed by
the [ENTER/YES] key.
The unit enters the MENU mode and the MENU list screen is shown.
2) Use the [MENU] dial to select the “DISK UTILITY” menu and press the [ENTER/YES] key.
The display now shows the DISK UTILITY menu screen.
Flashing