FARGO electronic Pro-L - Manual (Page 19)

14 Section 3: Getting Started
Pro-L Card Printer User’s Manual
C. UNPACKING AND INSPECTION
While unpacking your printer, inspect the carton to ensure that no damage has
occurred during shipping. Make sure that all supplied accessories are included
with your unit. The following items should be included with your printer:
n Printer
n Power Supply (see Section 3-D)
n Cleaning Roller Assembly (pre-installed)
n Software Installation CD (see Section 6)
n Warranty Statement and Registration Card
Save the carton and packing materials. They will come in handy when
transporting the unit.
D. APPLYING POWER
The power supply included with the printer is a universal power supply properly
configured for the power used in your country. To connect this power supply to the
printer, locate the appropriate power cord for your country and refer to the
following steps:
CAUTION! THE INCLUDED POWER SUPPLY IS DESIGNED FOR USE ONLY WITH THE
COLOR ID CARD PRINTER. IF YOU HAVE ANY DOUBTS ABOUT THE
PLUG CONFIGURATION OR THE VOLTAGE, DO NOT ATTEMPT TO USE
THE PRINTER. CONTACT YOUR AUTHORIZED RESELLER FOR
INFORMATION ON THE CORRECT POWER SUPPLY CONFIGURATION.
1. Place the power cord into the power cord port of the power supply.
proL.qxd 8/6/2000 3:30 PM Page 14