FARGO electronic Pro-L User Manual

Page 26

Advertising
background image

Section 4: Ribbons and Cards 21

Pro-L Card Printer User’s Manual

Dye-Sublimation/Resin Ribbons

Dye-sublimation/resin ribbons combine the yellow (Y), magenta (M), and cyan (C)

dye-sublimation panels with one or two resin black (K) panels. By combining both

types of ribbon panels, these ribbons allow you to print full-color, photo-quality

images with the dye-sublimation panels along with sharp, black text and bar codes

with the resin black panel(s). With most of these ribbons, a clear overlay panel (O)

is also included to protect the dye-sublimation images. Dye-sublimation images

must have either an overlay panel or an overlaminate applied to them, or they will

quickly begin to wear or fade. The following dye-sublimation/resin ribbon types

are available:

Full-Color (YMCKO)

This ribbon allows you to print full-color

(provides 250 prints)

photo ID cards along with resin black text and

bar codes. Bar codes printed with resin black

can be read by both infra-red and visible-light

bar code scanners.

Full-Color (YMCKOK)

This ribbon is intended to be used for

(provides 250 prints)

dual-sided printing. By supplying two resin

black panels, this ribbon lets you print full-

color with resin black on one side and resin

black-only on the other, without wasting an

entirely new set of ribbon panels for the black-

only side. An overlay panel (O) is also

included to protect the side of the card with

full-color dye-sublimation printing. No

overlay is necessary for the resin black-only

side.

Full-Color (YMCKK)

This ribbon is intended to be used for dual-

(provides 250 prints)

sided printing. By supplying two resin black

panels, this ribbon lets you print full-color

with resin black on one side and resin black-

only on the other, without wasting an entirely

new set of ribbon panels for the black-only

side. Since no overlay panel is included, this

ribbon must be used in conjunction with the

printer’s overlaminate function. No

overlaminate is necessary for the resin black-

only side.

Y

M

C

K

O

Y

M

C

K

K

Y

M

C

K

K

O

proL.qxd 8/6/2000 3:30 PM Page 21

Advertising