FARGO electronic Pro-L - Manual (Page 86)

Technical
Specifications
Section 10: Technical Specifications 81
Printing Method: Dye-sublimation/resin thermal transfer
Printing Resolution: 300 dpi (11.8 dots/mm)
Colors: Up to 16.7 million
Print Speed: Approximately 8 seconds (K)
Approximately 30 seconds (YMCKO)
Additional 20 seconds required if applying PolyGuard
overlaminate
Printing Area: Standard CR-80 Card:
Card Size
2.125” (54mm) x 3.375” (85.6mm)
Print Area
2.11” (53.5mm) x 3.37” (85.5mm)
Oversize Card:
Card Size
2.36” (60mm) x 3.62” (92mm)
Print Area
2.24” (56.9mm) x 3.37” (85.5mm)
Accepted Card Width: 2.1” to 2.63” W (53mm to 67mmW)
Accepted Card Length: Single Sided: 3.25” to 3.88” L (82mm to 98mmL)
Double Sided: 3.25” to 3.37” L (82mm to 85.3mmL)
Accepted Card Thickness: 010” to .040” (.254mm to 1.02mm);
10
proL.qxd 8/6/2000 3:30 PM Page 81