FARGO electronic Pro-L - Manual (Page 84)

Two or more cards feed at the same time.
n Be sure the cards you are using are not sticking together. Manually separate the
cards if you suspect they are sticking to one another. If separating cards,
remember not to touch the surface of the card where you intend to print, since
dirt or oil from your hands will impair print quality.
n You may need to adjust the Card Separator Flap if feeding cards varying from
the standard CR-80 3.375”L x 2.125”W x .030” (85.6mmL x 54.0mmW) card size.
See Section 8-C for adjustment instructions
I can’t get the cards in between the Card Input Guides.
n You may be trying to load cards that are too large. Be sure the cards being
loaded are within the accepted card sizes of 2.1” W x 3.0”L (53mmW x 76mmL)
to 2.6” W x 3.7” L (66mmW x 94mmL). If the cards you are loading are within
these specifications and still do not fit within the Card Guides, you may need
to adjust the Card Input Guides. See Section 8-A for adjustment instructions.
Section 9: Troubleshooting 79
Pro-L Card Printer User’s Manual
proL.qxd 8/6/2000 3:30 PM Page 79