FARGO electronic Pro-L - Manual (Page 20)

Section 3: Getting Started 15
Pro-L Card Printer User’s Manual
2. Place the DC power plug end of the power supply cord into the printer’s
Power Input Port.
3. Place the AC power plug end of the power supply cord into an available wall
outlet.
Power is automatically applied to the printer when it is plugged in. Press the
On/Cancel button if you wish to turn the printer OFF. If the printer will not be
used for a long period of time, unplug the power supply cord from the wall outlet.
Power Input Port
proL.qxd 8/6/2000 3:30 PM Page 15