FARGO electronic Pro-L - Manual (Page 88)

Appendix A: Magnetic Stripe Encoding Module 83
Appendix A:
Magnetic Stripe
Encoding Module
A. MAGNETIC TRACK OPTIONS
The card printer can be purchased with one of two types of factory-installed
Magnetic Stripe Encoding Modules. The first, most common type is an ISO
Standard encoding module with a dual-coercivity (high or low) encoding head.
The second is a JIS II Standard encoding module commonly used in Japan.
By default, the printer driver is set to encode according to ISO standards onto high-
coercivity magnetic stripes. To change the encoding mode, coercivity setting, or to
modify the ISO standards for tracks 1, 2, and 3, simply select the Magnetic Track
Options tab (or Magnetics button) from within the printer driver setup window.
The Magnetic Track Options will display.
A
proL.qxd 8/6/2000 3:30 PM Page 83