FARGO electronic Pro-L - Manual (Page 74)

Section 9: Troubleshooting 69
Pro-L Card Printer User’s Manual
TOP Line of LCD (continued)
Message Cause Solution
No Shield Loaded You are trying to print If using the SmartGuard
with the printer driver’s feature, insert an access card
SmartShield option selected which contains a SmartShield
even though you (a) are image or encode a
not using the optional SmartShield image onto the
SmartGuard Security current card and try your
Feature or (b) if using the print job again. If you do not
SmartGuard feature, you wish to print a SmartShield
do not have a SmartShield image, simply deselect the
image encoded onto the printer driver’s SmartShield
SmartGuard Access Card option.
currently inserted into the
printer.
Print Cover Open The top-right cover is not Check that nothing is blocking
properly shut. the cover from being shut and
close the cover.
Printer Ready Indicates printer is ready
to print.
Printing Indicates printer is printing.
Printing Yellow Indicates print ribbon’s
yellow panel is printing.
Printing Magenta Indicates print ribbon’s
magenta panel is printing.
Printing Cyan Indicates print ribbon’s
cyan panel is printing.
Printing Black Indicates the print ribbon’s
black panel is printing.
Printing Black-2 Indicates the print ribbon’s
second black panel is
printing on the back side
of card.
Printing Overlay Indicates print ribbon’s
overlay panel is printing.
Printing Resin Indicates a resin-only
ribbon is printing.
proL.qxd 8/6/2000 3:30 PM Page 69