1+0/1+1 installation, Assembling the rfu and ocb – GE HC HP User Manual
Page 10
Advertising
GE MDS Intrepid-HC HP Installation Guide
1-4
1+0/1+1 Installation
This section describes the installation procedure for GE MDS Intrepid-HC HP in a 1+0 or 1+1 configuration.
The components involved in this procedure include the following:
RFU
OCB
Hanger Kit
Pole Mount Kit
Assembling the RFU and OCB
The RFU is generally assembled in the factory with the OCB, and delivered as a single unit.
If the RFU is delivered separately with the OCB, do the following:
Important:
The instructions in this guide should be performed indoors.
1. Remove the RFU and the OCB from the box.
2. Make sure that the OCB sealing gasket is in place.
OCB
RFU
Filters
Advertising