GE HC HP - Manual (Page 71)

GE MDS Intrepid-HC HP Installation Guide 2-29
Trap Forwarding Configuration
This section explains how to set up a trap forwarding plan. If your application does not require trap forwarding, you
can skip the following procedure.
1. Select Configuration, Management System, Traps Configuration, or click the Traps Configuration icon.
The Trap Forwarding Configuration window appears.
Trap Forwarding Configuration Window
2. In the Managers IP Address area, specify the IP addresses of the managers to which you want traps to be sent.
For each manager IP you specify, specify the Trap Port, and for Send Trap for Alarms with Severity, select
the severity filter to determine which types of alarms will be forwarded.