GE HC HP - Manual (Page 46)

2-4 MDS Intrepid-HC HP Installation and Operation
To define IP Addresses:
1. In the main terminal program menu, select Configuration.
2. Select IDC.
3. Select Basic.
4. Select IP and define the addresses as described above.
Important After you set up IP addresses, restart the IDU to activate them.
Setup Options in the Terminal Program
The main menu in the terminal setup program includes the following options:
Configuration (1) - the main setup section in which you can configure the IDC, the right and left drawers,
protection, SNMP management, in-band routing, and other such parameters.
System Status (2) - used to obtain information about the different software versions currently used in the system.
Maintenance (3) - used to perform software upload, download, and reset.
Diagnostics (4) - used to perform loopbacks and obtain system information.
Logs (5) - used to view alarm and configuration log reports.