GE HC HP - Manual (Page 55)

GE MDS Intrepid-HC HP Installation Guide 2-13
The alarm outputs are Form C Relays. Each output relay provides three pins, as follows:
Normally Open (NO)
Normally Closed (NC)
Common (C)
Output alarms can be defined as any of the following:
Major
Minor
Warning
External
Power
BER
Line
Loopback
LOF
IDU
ODU
Cable
Remote
The default alarm output setting for each relay is “Power”.
The relays may be connected to customer-specific applications. Refer to Appendix B for details concerning the
alarm connector pin assignments.
6. After you complete the configuration, click Apply to save the settings.
7. Click Close.
Exiting the NMS
To exit the NMS, select File, Exit in the main window.