GE HC HP - Manual (Page 19)

GE MDS Intrepid-HC HP Installation Guide 1-13
Installation Components
Installation Procedure
1. Connect both pole mount kits to the pole.
If the RFUs are to be assembled one above the other, there should be a minimum distance of 40 cm between
the two pole mount kits, as shown in the following illustration.
40 cm
M10 Screws
Fastening
the OCB to
the Hanging
Bracket
Hanging
Bracket
Lifting
Handle
Pole Mount
Kit with Clamp
Bracket Diversity
Coupler Main
Coupler