GE HC HP User Manual
Page 63
GE MDS Intrepid-HC HP Installation Guide 2-21
Starting the NMS
1. Select
Start, Programs, NMS, NMS Element Manager.
The NMS Login window appears.
NMS Login Window
2.
Enter the IP address of the second IDC, and the SNMP community (for SNMP protocol access). If you are
working in cascading mode, select the IP address of the second IDC in the master unit.
3.
For User Name use admin and for Password use admin (default settings)
4. Select
Save Password if you want NMS to remember the password you entered.
Note that there are two types of passwords, each with a different security level for authorized activities: Read
Only - user can perform monitoring activities only.
Read/Write - user can change system configuration and system administrator parameters, and perform
monitoring activities.
After you log in, the Main NMS window appears.