GE HC HP - Manual (Page 7)

GE MDS Intrepid-HC HP Installation Guide 1-1
Chapter 1: Installation
General
This guide provides installation procedures for the following GE MDS Intrepid-HC HP systems:
GE MDS Intrepid-HC HP 1+0/1+1 configuration
GE MDS Intrepid-HC HP 2+2 XPIC configuration
GE MDS Intrepid-HC HP N+1 configuration
About GE MDS Intrepid-HC HP
The GE MDS Intrepid-HC HP supports multiple capacities, frequencies, modulation schemes, and configurations
for various network requirements. Its RF transceiver units operate in the frequency range of 6-11 GHz.
GE MDS Intrepid-HC HP capacities can be upgraded from 45 Mbps up to N x 155 Mbps.
For long distance links and backbone requirements, GE MDS Intrepid-HC HP offers Space Diversity functionality.
Each transceiver can contains two receivers and one transmitter, which enable built-in diversity capability.
Built in Diversity in each transceiver increases the reliability of the link. In a 1+1/2+2 Hot Standby or N+1
configuration with Space Diversity, if a hardware failure occurs, the Diversity will not be affected.
GE MDS Intrepid-HC HP is installed in a Split-Mount configuration, as shown in the following example
illustration.