Motorola GT10 - Manual (Page 154)

GT10/GT30 8.3 Replacing the Front Panel Protective Sheet
131
8.3 Replacing the Front Panel Protective Sheet
In order to protect the touch panel and keep it clean, the GT main unit comes with a
protective sheet attached over the panel. If this protective sheet becomes dirty or worn,
it should be replaced. Replacement sheets are available as an optional item.
Product name Contents Product number
Front panel protective sheet Front panel protective sheets for replacement (set of 10) For GT10 AIGT180
For GT30 AIGT380
Replacing the Front Panel Protective Sheet
Follow the steps below to replace the sheet:
1. Remove the attached front panel protective sheet.
First, peel off the front panel protective sheet already attached to the GT main unit,
starting from the upper left edge, where the knob is.
2. Peel off the seal from the provided protector sheet and attach it to the unit.
Take out one of the replacement front panel protective sheets and peel off the seal with
the shiny side. When attaching the sheet, align the adhesive edges with the front of the
GT main unit.
3. Finish by peeling off the thin film attached to the top of the front panel protective
sheet.
Peel off the front film.
Front
Adhesive face (attached seal)