2 connecting to the tool port, Connecting to the tool port, Fp0 communication format settings – Motorola GT10 User Manual
Page 69
GT10/GT30
4.2 Connecting the FP0
46
customer. When purchasing a cable, the following precautions should
be observed:
Shielded wire with a size of AGW#28 to 16 (conductor
cross–section surface area: 0.08 mm
2
to 1.25 mm
2
) should be used
for connections.
For wiring procedures, please refer to “Wiring the COM. Port” on
4.2.2
Connecting to the TOOL Port
AIGT8192
GT30
FP0 TOOL port
GT10
FP0 communication format settings
System register no. Item
Value Set
System register
value
410
Unit number
1
K1
411
Data length
8 bits
H0
Modem connection No connection
414
Baud rate setting
19200 bits/s
H010X
X is 0 to 6
PLC communication cable: Mini–DIN 5–pin loose–wire cable (AIGT8192)
Mini–DIN plug side signals
Pin no.
Abbrev.
Wire Color
1
SG
Brown
2
SD
White or red
3
RD
Green or orange
4
5
Specifications
L
Product No.
Mini–DIN 5–pin
Single–side
loose wire
2m
AIGT8192
←To set 19200 bits/s for both
the COM. port and the TOOL
port, “H0100” should be set.
3
5
4
1
2
5mm
35mm
2000mm
Wires’ cross section: 0.25mm
2