Motorola MVME1X7P User Manual

Page 109

Advertising
background image

Functional Blocks

http://www.motorola.com/computer/literature

2-19

2

Each of the 31 interrupts can be enabled to generate a local bus interrupt at
any level. For example, VMEbus IRQ5 can be programmed to generate a
level 2 local bus interrupt.

The VMEbus AC fail interrupter is an edge-sensitive interrupter connected
to the VMEbus ACFAIL

∗

signal line. This interrupter is filtered to remove

the ACFAIL

∗

glitch which is related to the BBSY

∗

glitch.

The SYS fail interrupter is an edge-sensitive interrupter connected to the
VMEbus SYSFAIL

∗

signal line.

The write post bus error interrupter is an edge-sensitive interrupter
connected to the local-bus-to-VMEbus write post bus error signal line.

The VMEbus IRQ1 edge-sensitive interrupter is an edge-sensitive
interrupter connected to the VMEbus IRQ1

∗

signal line. This interrupter is

used when one of the tick timers is connected to the IRQ1

∗

signal line.

When this interrupt is acknowledged, the vector is provided by the
VMEchip2 and a VMEbus interrupt acknowledge is not generated. When
this interrupt is enabled, the VMEbus IRQ1 level-sensitive interrupter
should be disabled.

The VMEchip2 VMEbus interrupter acknowledge interrupter is an edge-
sensitive interrupter connected to the acknowledge output of the VMEbus
interrupter. An interrupt is generated when an interrupt on the VMEbus
from VMEchip2 is acknowledged by a VMEbus interrupt handler.

The tick timer interrupters are edge-sensitive interrupters connected to the
output of the tick timers.

The DMAC interrupter is an edge-sensitive interrupter connected to the
DMAC.

The GCSR SIG3-0 interrupters are edge-sensitive interrupters connected
to the output of the signal bits in the GCSR.

The location monitor interrupters are edge-sensitive interrupters connected
to the location monitor bits in the GCSR.

The software 7-0 interrupters can be set by software to generate interrupts.

The VMEbus IRQ7-1 interrupters are level-sensitive interrupters
connected to the VMEbus IRQ7

∗

-IRQ1

∗

signal lines.

Advertising