Motorola MVME1X7P - Manual (Page 71)

Memory Maps
http://www.motorola.com/computer/literature 1-45
1
structure for that set. For example, for a 64MB, 33MHz
MVME167P board at revision C, the PWA field contains:
01-W3620F35C
(The 13 characters are followed by three blanks.)
5. Four bytes contain the speed of the board in MHz. The first two
bytes are the whole number of MHz and the second two bytes are
fractions of MHz. For example, for a 25.00 MHz board, this field
contains:
2500
6. Six bytes are reserved for the Ethernet address. The address is stored
in hexadecimal format. (Refer to the detailed description earlier in
this chapter.)
7. These two bytes are reserved.
8. Two bytes are reserved for the local SCSI ID. The SCSI ID is stored
in ASCII format.
9. Eight bytes are reserved for the systems serial ID, for boards used in
a system.
10. Eight bytes are reserved for the printed wiring board (PWB) number
assigned to the first mezzanine board in ASCII format. This does not
include the
01-W prefix. For example, for a 16MB parity mezzanine
at revision E, the PWB field contains:
3690B03E
11. Eight bytes are reserved for the serial number assigned to the first
mezzanine board in ASCII format.
12. Eight bytes are reserved for the printed wiring board (PWB) number
assigned to the optional second mezzanine board in ASCII format.
13. Eight bytes are reserved for the serial number assigned to the
optional second mezzanine board in ASCII format.
14. Growth space (153 bytes) is reserved. This pads the structure to an
even 256 bytes. System-specific items, such as size of system side,
and systems side version, may go here.