Multi-Tech Systems RF500S User Manual
Page 102
102
Route Finder RF500S User Guide
Set Dial-up type (NT/Novell Server Connection):
Windows 95/98:
1.
Right-click the newly created connection icon, then click Properties; the My Connection dialog
box opens.
2.
On the General tab, click
Server Type; the Server Types dialog box opens. Select PPP: Windows
95, Windows NT 3.5, Internet.
3.
Click (to check or enable) only the following items: Log on to network, Enable software
compression, and TCP/IP. [Note: do not disturb any other items that are already checked.]
Dial in to your network (NT/Novell Server Connection):
Windows 95/98:
1.
You are ready to dial in to your network.
2.
Double-click the
new connection icon; the Connect To dialog box opens.
3.
Enter the user name (if necessary) and password configured for you on the RF500S.
Note: If your particular situation permits, click (to check) Save password.
4.
Click Connect.
5.
After connecting to the RF500S, you can access the same services and resources as if you were
connected to the network locally.