Multi-Tech Systems RF500S User Manual
Page 104
104
Route Finder RF500S User Guide
4.
Select (i.e., highlight) Adapter, then click Add. The Select Network adapters dialog box opens.
Win95/98
5.
In the
Manufacturers option box, select Microsoft. In the Network Adapters option box select
Dial-up adapter.
6.
Click OK (twice) to return to, and then close, the Network dialog box.
Windows NT:
Dial-up Networking adds PPP and SLIP protocol support, enabling your workstation to gain access to
a remote computer or network, even if your computer is not on a network.
1.
Double-click My Computer, then double-click Dial-Up Networking. The following screen is
displayed:
2.
Click Install, then follow the onscreen instructions to configure your connection.
Adding TCP/IP (Unix Server Connection):
Windows 95/98/NT:
1.
In the Network dialog box,
Configuration tab, click Add.
2.
Select Protocol and click Add.