Multi-Tech Systems RF500S User Manual
Page 27
27
Chapter 3 - Software Installation and Configuration
10. The Setup Wizard: DNS IP Address dialog box displays.
Enter your ISP’s DNS Server IP address. If you are not sure of the IP address, contact your ISP.
Refer to the Glossary in the User Guide for more information about the DNS Server.
Click Next>>.
11. The Setup Wizard: Modem Settings dialog box displays.
The final step in configuring your RF500S for basic operations is to define your modem
Manufacturer, Model and the DTE baudrate or speed of communication between the RF500S’s
serial async port and your modem or ISDN TA.
Select your modem and baudrate as described on the following pages.
Note: If you do not have a device attached to the serial async port, use the default modem
values, and click Next>>.
12. To select your modem, in the
Asynchronous port settings box,
click
The system loads modem information.