Test connection – Multi-Tech Systems RF500S User Manual
Page 70
Advertising
70
RouteFinder RF500S User Guide
Test Connection
The Test Connection option tests your connection settings and assist you in determining if problems
are due to the modem, the RouteFinder, or an incorrect setting. Test Connection uses the attached
modem(s) to dial-up the remote server (ISP) and establish a connection.
1.
From the main RouteMonitor dialog box, click Test Connection to begin testing.
2.
The Test Connection dialog box displays.
3.
Select
Connect Port 1 to test the WAN connection, or Connect Port 2 to test the Async
connection.
4.
The monitor display window displays the actions of the test.
5.
To terminate the connection, refer to the Terminate Connection instructions which follow.
6.
Click Exit to close the Test Connection dialog box.
Advertising