Ip address/name – Multi-Tech Systems RF500S User Manual
Page 73
73
Chapter 6 - RouteFinder Monitor
IP Address/Name
The IP Address/Name function allows you to associate a name with a particular IP address and name
on your network. This information will appear in the relevant monitor displays. The IP Address/Name
option is used to assist the Network Administrator in determining which users are transmitting and
receiving data without having to remember their specific IP addresses.
Each computer listed must have a fixed IP address for your network. You may configure a fixed IP
address on the individual computer or use the RF500S’s DHCP server IP reservation system (refer to
the LAN DHCP section of RouteFinder Manager chapter of this User Guide).
1.
From the main RouteFinder Monitor dialog box, click IP Address/Name.
2.
The IP User Mapping dialog box displays.
3.
Enter each computer’s IP Address and associated User Name in the provided fields.
4.
Click Add after each IP address and name have been added to the list.
5.
When all addresses have been added, click OK.