Multi-Tech Systems RF500S User Manual
Page 20
20
RouteFinder RF500S User Guide
6.
The Setup Wizard: Device IP Address dialog box displays.
•
Enter your local internal network’s IP address for this device.
The Setup Wizard will automatically detect the first three octets of your local IP address. You
must enter the last octet only.
•
If you wish, you can change the network name of your RouteFinder. If your ISP requires your
device to have a name, you may use the value entered in this field.
•
Click Next>> to continue. The device will search the network to ensure that the IP address is
valid. This may take several seconds.
Note: If your ISP provided you with an IP address, do not enter that address in this field.
Enter the IP address for this device on your local network. Refer to the Glossary in this User
Guide for additional information on IP addressing.