Multi-Tech Systems RF500S - Manual (Page 82)

82
Route Finder RF500S User Guide
3. Click Add; the Select Network Component Type dialog box opens.
4. Select (i.e., highlight) Adapter, then click Add. The Select Network adapters dialog box opens.
Win95/98
5. In the Manufacturers option box, select Microsoft. In the Network Adapters option box select
Dial-up adapter.
6. Click OK (twice) to return to, and then close, the Network dialog box.
Windows NT:
Dial-up Networking adds PPP and SLIP protocol support, enabling your workstation to gain access to
a remote computer or network, even if your computer is not on a network.
1. Double-click My Computer, then double-click Dial-Up Networking. The following screen is
displayed:
2. Click Install, then follow the onscreen instructions to configure your connection.