Multi-Tech Systems RF500S - Manual (Page 49)

49
Chapter 5 - RouteFinder Manager
Edit Login Script for Remote Access
1. From the Port Settings, Async tab, click Edit Login Script.
2. The login Script dialog box displays.
A sample remote access login script is shown below. If a remote access client is configured to
“bring up a terminal window after dialing”, this remote access login script initiates.
For Remote Access, the device will act as the server side...
Send ‘Welcome’ displays “Welcome” to remote site.
Send sends an Enter (Carriage return + line feed) to the remote site.
“Send Username” prompts the remote site for a user name.
“Retrieve 1” will wait for the remote site to enter the user name that will be used for PPP
authentication.
“Send Password” prompts the user for a password.
“Retrieve 2” will wait for the remote site to enter a password.
“Verify 3” instructs the device move to login script line 3 if PPP authentication fails.
“Go” means start PPP protocol.