Tcp/ip tab – Multi-Tech Systems RF500S User Manual
Page 75
75
Chapter 6 - RouteFinder Monitor
TCP/IP Tab
The TCP/IP tab displays all TCP/IP requests made by your network device. You may select to view
TCP/IP sessions for the
WAN Ethernet or the Async Port.
1.
The
TCP/IP tab is the default tab displayed in the RouteFinder Monitor dialog box. If it is not
displayed, click the
TCP/IP tab.
Note: The TCP/IP sessions displays the history of the TCP/IP session through the selected port.
The TCP/IP information presented does not represent the current status of the TCP/IP session.
The TCP/IP tab displays the following information:
Date/Time:
Indicates the date the request was made.
Port:
Indicates the port you are viewing.
Type:
Displays the type of request being made.
Local IP:
Indicates which IP address you have requested information from.
Remote IP:
Indicates which IP address was requested.
Port Number:
Indicates which TCP/IP port was requested.
2.
To Exit RouteFinder Monitor, close the window.