Using routefinder setup wizard – Multi-Tech Systems RF500S User Manual
Page 18
18
RouteFinder RF500S User Guide
Using RouteFinder Setup Wizard
Note: Before beginning this procedure, ensure that your RF500S is properly connected to the
network and is powered on.
After installing the software, you may return to the RouteFinder Setup Wizard at any time, by
clicking Start | Programs | RouteFinder Manager | RouteFinder Wizard.
Before running the Setup Wizard, it is strongly recommended that you exit all Windows programs.
1.
Insert the RF500S System CD into your computer’s CD-ROM drive. The RF500S System CD
screen appears.
Note: If Autorun is disabled on your computer, use Windows Explorer to view the contents of
the CD. Double-click the CD icon to display the RF500S System CD main screen.
2.
Click Install Software.
3.
Follow the on-screen instructions to install the software.
4.
When the software installation completes, the Setup Wizard dialog box displays.
Click OK.