Multi-Tech Systems RF500S - Manual (Page 42)

42
RouteFinder RF500S User Guide
Async Port
The Async Port can be configured to provide either IP Routing or Remote Access. IP Routing is used
to connect your network to another router through the Serial async port. Remote Access allows remote
users to dial-in to the device to access and share network resources as if they were logged on to the
network locally.
1. To configure the RF500S for IP Routing, select IP Routing in the Async Port section of the
General Settings dialog box.
2. Click PPP Settings.
3. The IP Routing Settings dialog box displays.
IP Routing (NAT Enabled):
If NAT is enabled, all local users will be firewall protected and will share one IP address through
the Async port. Enter values in the fields as described:
Tel Number:
Enter the phone number required to access your ISP.
User Name:
Enter the account user name to be authenticated by your ISP.
Password:
Enter the user account password to be authenticated by your ISP.
Password Verification:
Re-enter the user account password for verification.
External (Port) IP:
Enter the fixed IP address provided by the remote site System Administrator. If this address is
automatically assigned by the remote site DHCP server, enter 0.0.0.0
Assign Remote Site an IP Address:
Check the box if you will specify the IP Address of the remote site.
Remote IP address:
Enter the IP address the remote site will use.