Multi-Tech Systems RF500S - Manual (Page 25)

25
Chapter 3 - Software Installation and Configuration
b.) Use RADIUS Server
Select this option if you would like your remote clients to be authenticated on a RADIUS server.
You must enter the following RADIUS Server Settings:
RADIUS Access Server IP Address:
Enter the IP address of the RADIUS Access Server.
RADIUS Accounting Server IP Address:
Enter the IP address of the RADIUS Accounting Server.
Secret:
Enter your Secret RADIUS code or password.
Secret Verification:
To confirm your Secret code, re-enter your code or password.
Note: In most cases, the RADIUS Access Server and the RADIUS Accounting Server are the
same server, so the IP addresses will also be the same.
Click Next>> and continue with Step 10.