Multi-Tech Systems RF500S - Manual (Page 22)

22
RouteFinder RF500S User Guide
8. The External IP Assignment dialog box displays.
Enter the WAN Ethernet IP address information provided by your ISP or other external network
administrator.
• In the External IP Address box, enter the WAN Ethernet IP Address.
• In the External IP Netmask box, enter the Netmask of the WAN Ethernet IP Segment (for Class C
networks, the Netmask is generally set to 255.255.255.0).
• In the External Gateway IP Address box, enter the IP address of the Gateway to the destination
network.
Note: If your ISP uses dynamic IP addressing (DHCP), leave the External IP address and the
External Gateway IP address at the default values of 0.0.0.0. Set the External IP Netmask to the
default value of 255.255.255.0.
Click Next>>.