Multi-Tech Systems RF500S - Manual (Page 90)

90
Route Finder RF500S User Guide
3. In the Manufacturers option box, select Microsoft. In the Network Protocols option box, select
IPX/SPX-compatible Protocol.
4. Click OK (twice) to return to, and then close, the Network dialog box.
Windows NT:
Note: NWLink IPX/SPX Compatible Transport is probably already installed, along with NWLink
NetBIOS and TCP/IP Protocol; however, if NWLink IPX/SPX Compatible Transport does not
appear on the Protocols tab of the Network dialog box, perform the following steps:
1. In the Network dialog box, Protocol tab, click Add. The Select Network Protocol dialog box
opens.
2. Select NWLink IPX/SPX Compatible Transport , then click OK to return to the Network dialog
box.
3. Click Close to close the Network dialog box and return to the Desktop.
Adding Client for NetWare Networks (Novell Server Connection):
Windows 95/98:
1.
In the Network dialog box, Configuration tab, click Add.
2. Select Network Client and click Add.
3. The Select Network Client dialog box displays. In the Manufacturer’s option box, select
Microsoft. In the Network Clients option box, select Client for NetWare Networks.
4. Click OK to add this Client and return to the Network dialog box.