Multi-Tech Systems RF500S - Manual (Page 26)

26
RouteFinder RF500S User Guide
2.) IP Routing (NAT Enabled) and
3.) IP Routing (NAT Disabled)
If you select IP Routing for the asynchronous port, the Setup Wizard: IP Routing dialog box
displays.
Enter the information required to dial-up and login to your ISP’s remote server:
Telephone Number:
Enter the phone number used to dial your remote server (ISP).
Note: If you must dial a number to get an outside line (e.g., “9”, or “0”), enter the required number
plus a “w”(wait) or a comma in the Telephone box. (e.g., 9w555-2323 or 9,,5552323) Each comma
provides a 3-4 second delay.
User Name:
Enter the User Name for your remote server or ISP account.
Password:
Enter the Password for your remote server or ISP account.
Password Verification:
Re-enter the password for your remote account.
Click Next>>.