Multi-Tech Systems RF500S User Manual
Page 59
59
Chapter 5 - RouteFinder Manager
Enable Client Filter Settings
The
Client Filter allows you to decide which services are allowed into your network and which clients
are authorized to access them.
1.
From the Filter Settings dialog box, select Enable Client Filter Setting.
2.
Click Client Filter Settings.
3.
The Filter Settings dialog box displays.
The filter works by filtering TCP/IP port numbers. The 5 most commonly used port numbers are
listed for you. They include the port numbers for Mail, WWW, FTP, Telnet and News. If you would
like to filter other services, you must know the port number for the service.
4.
Click Edit to enter new service port numbers.
5.
Enter the TCP/UDP Port Number and click Add.
Note: Refer to the Glossary of the User Guide for a definition of Port.
6.
Click Privileged Clients.