Muratec F-300 - Manual (Page 104)

6-4 U
SING
F-
CODE FEATURES
8
Use the numeric keys to enter the ITU-T-compatible password for this box. This pass-
word can be up to 20 characters in length and include any combination of numbers
and the and # characters (but no other non-numerical characters).
To change a number, press [ ] or [ ] to move the cursor and press [Cancel] to erase
it. Then re-enter the number correctly.
9
Press [Enter].
Box Type :Bulletin

/  /Enter
10
Press [ ] or [ ] to select the box type, then press [Eenter].
If you chose “Bulletin,” go on to step 11.
If you chose “Relay,” skip to step 13.
If you chose “Security,” skip to step 19.
If you setup a Bulletin box:
11
The bulletin box has the following settings:
• Rx Protect — Determines whether or not the document is received in the bulletin box.
Rx Protect :Off

/  /Enter
On (Rx protection is on): Documents are not received in the box.
Off (Rx protection is off): Document are received in the bulletin box and you can
set the two additional settings — “Auto print” and “Over-
write Doc.” below.
Press [ ] or [ ] to select on or off, then press [Enter].
Go on to the next one.
• Auto Print — Determines whether to print a received document.
This setting appears only when the “Rx protect” is set to off.
Auto Print :Off

/  /Enter
On: A document will be printed automatically when it is received in the bulletin box.
Off: Received documents are not printed. You will have to print them manually.
(See page 6-9.)
Press [ ] or [ ] to select on or off, then press [Enter].
Go on to the next one.
• Overwrite Doc — Determines whether to overwrite existing (erase) the documents
when the box receives a new one.
This setting appears only when the “Rx protect” is set to off.
Overwrite Doc. :Off

/

/Enter
On: The currently stored documents in the box will be replaced with a new
received document.
Off: A received document will be added in the box. Up to 30 documents (each docu-
ment can include one or more pages) can be stored in each box.