Muratec F-300 - Manual (Page 13)

v
1
2
3
4
5
7
6
9
8
11
10
12
A
Precautions
Installation precautions
Clean
Dust buildup can damage your machine. However, do not use a dust cover,
which can cause overheating.
Periodically clean your machine as instructed in this manual.
Away from direct sunlight
To avoid overheating, set up the machine away from direct sunlight or
heating unitr.
Level, and vibration-free
To avoid damage to the machine orpersonal injury, set the machine up in a
level, vibration-free location.
Near a phone jack & an AC power outlet
Your machine uses a standard (modular) telephone jack.
The power cord is about 6.5 feet long when stretched to its limit, and the
power cord should never be stretched to its limit.
Away from a television or radio
Many appliances and office equipment, including televisions, radios, copy
machines, air conditioners and computers, can generate electronic noise
that can interfere with the operation of your machine.
Avoid extreme high / low temperature
50 F to 89.6 F
(10 C to 32 C)
Use your machine within the temperature range of 10 °C to 32 °C (50 °F to
89.6 °F).