Muratec F-300 - Manual (Page 118)

7-6 C
OPYING
Also, you can select the paper source manually by pressing [Paper Size /Next Doc.].
The LCD toggles the paper size in the 1st cassette, in the 2nd cassette (if installed) and
on the bypass tray.
01
None Ltr 100%
01
Legl [Legl ] 100%
01
Ltr [Ltr ] 100%
Copy Ready 01
Auto Ltr 100%
If the bypass tray is empty, the machine shows “None” for the paper size of the bypass
tray.
Selecting the document size
When using the document glass, select the document size by pressing [Doc. Size] repeat-
edly until your desired document size appears. You can choose the Letter, Half-letter
or Legal:
01
Auto HLtr 100%
01
Auto Legl 100%
Copy Ready 01
Auto Ltr 100%
NOTE: • The document glass is available only for the MFX-1330.
• When the document size selection is set to “Auto” (see “Copy Auto” of “Copy set-
tings” on page 10-7), you cannot select the document size by pressing [Doc. Size].
In this mode, the machine will set the document size automatically according to
the paper size and zoom settings.
Copy Ready 01
Ltr [Ltr ] 100%
[(Document size)] means the machine automatically sets the document size.