Muratec F-300 - Manual (Page 73)

4-9 S
ENDING FAXES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
S
ENDING
F
AXES
Reviewing or canceling parts of a broadcast
You also can review or cancel certain numbers within a broadcast:
1
Press [Job Confirm./Fax Cancel], then [Enter].
2
Press [ ] or [ ] to scroll through currently stored broadcast commands.
C01:Broadcast

/

/

/Cancel
3
When the command you want to cancel is shown, skip to step 6.
If you want to review individual numbers within this broadcast, go on to step 4 with-
out pressing [Cancel].
4
To review individual numbers within this broadcast, press [ ] to see the first number.
The machine shows:
9-5550388

/

/

/Cancel
5
Press [ ] or [ ] until you find the number you want to cancel.
6
Press [Cancel], [Cancel].
The next number will appear and if you want to cancel this number, press [Cancel]
twice.
If you want to cancel a different number, go back to step 5.
If you want to go back to reviewing or canceling another command, press [ ].
To stop reviewing or canceling commands, press [Reset].
Printing a delayed command list
Your machine can print a command list which tells you:
• The command’s identification number
• The phone number, or “Remote location”
• The start time (this appears in a DD,HH:MM format)
• A “note” telling you if the command is a polling or F-Code operation.
To print a delayed command list, press [Menu], [5], [1], [0], [6], then [Enter].
Printing a stored document
Your machine can print out each document stored for delayed transmission.
To print a stored document, you will need to know the document’s command number,
which you can obtain by either reviewing the commands or printing a delayed command
list (see above).
1
Press [Menu], [4], [3], [5], then [Enter].
Select Command No.
C01:123-4567
2
Press [ ] or [ ] to select the command number.
3
Press [Enter].