Muratec F-300 User Manual

Page 70

Advertising
background image

4-6

S

ENDING

FAXES

Real-time transmission (non memory transmission)

Your machine will simply dial the other fax and when it makes contact, your machine

will feed the document through, scanning and transmitting real time
• With real time transmission, you can watch each page as it is scanned and sent.
To perform a real time transmission:

1

Switch to the Fax mode by pressing [COPY

FAX

SCAN].

2

Place the document on the ADF.

NOTE: • The document glass cannot be used for real time transmission.

• The document glass is available only for the MFX-1330 .

3

Obtain a dial tone, either by:
• Pressing [Advanced Functions] repeatedly until “Monitor” appears, and then press

[Enter.]

– or –
Pressing the "Monitor" soft key
–or–
• Lift the handset if you have connected an external telephone to your machine.

In either case, the machine shows:

** Tel Mode **

_

– or –
Press [Advanced Functions] repeatedly until “Memory Tx” appears and press

[Enter]. Then select “Off” and press [Enter] to turn off the memory transmission.

– or –

If you assigned “Memory Tx” to a soft key (page 8-2), turn off the memory transmission
by simply pressing that key.

NOTE: “Monitor” is a default soft key on the F-300.

4

Dial the fax number.
• Use the numeric keys to dial the number.
–or–
• Press a one-touch key. (See page 3-6.)
–or–
• Press [Speed Dial /Group] and three-digit code. (See page 3-8.)
–or–
• Use the phone directory dialing. (See page 3-11.)

NOTE: With real time transmission, only one destination can be dialed.

5

When you hear fax tones from the remote unit, press [Start].

If a person answers the phone, use the handset to tell that person that you are trying

to send a fax. When you hear fax tones, press [Start].

If the call fails and you used “Monitor” to dial, press [Advanced Functions] repeatedly

until “Monitor” appears, then press [Enter] or press the “Monitor” soft key to hang up.

If you are using the handset, hang up after pressing [Start].

NOTE: To cancel the transmission, use Review commands features. (page 4-8)

Advertising