Making copies, Making copies using the adf 1, Making copies using the document glass – Muratec F-300 User Manual

Page 115

Advertising
background image

7-3

C

OPYING

1
2
3
4
5
6
7
8
9
10
11
12
13
14
A

C

OPYING

Making copies

Making copies using the ADF

1

Switch the machine to copy mode by pressing [COPY

FAX

SCAN].

Copy Ready 01

Auto Ltr 100%

2

Place your document face up on the ADF and adjust the document guides to the docu-

ment size.

3

As needed, set the copy settings including the document type and scanning contrast,

number of copies, zoom ratio and sort setting. See “Basic copy settings” on page 7-4.

To clear the settings, press [Reset].

4

Press [Start] to begin copying.

To stop copying, press [Stop].

Making copies using the document glass

The document glass is available only for the MFX-1330.

1

Switch the machine to copy mode by pressing [COPY

FAX

SCAN].

Copy Ready 01

Auto Ltr 100%

2

Make sure that there is no document on the ADF. If a document is on the ADF, it

takes priority over the document on the document glass.

3

Place your document face down on the document glass and align it to the upper left

corner. Then close the platen cover.

4

Press [Doc. Size] to select the document size, Letter, Half-letter or Legal.

5

As needed, set the copy settings including the document type and scanning contrast,

number of copies, zoom ratio and sort setting. See “Basic copy settings” on page 7-4.

To clear the settings, press [Reset].

6

Press [Start] to begin copying.

To stop copying, press [Stop].

Advertising